From PS0083124 at TechMahindra.com  Wed Feb  8 06:55:25 2012
From: PS0083124 at TechMahindra.com (Peeyush.3.Sharma)
Date: Wed, 8 Feb 2012 11:25:25 +0530
Subject: [OpenIMSCore-Users] How to enable the PCRF module in P-CSCF
Message-ID: <C86CA6B754CC444FAED01331196CA25659BAAA96DB@SINNODMBX001.TechMahindra.com>


Hi Everybody,

I want to enable the PCRF module in P-CSCF in order to let it communicate with a PCRF client on another machine.
Kindly tell me what are the necessary changes that need to be made in the file and what part to uncomment so as to make it work.


Thanks & Regards,
Peeyush Sharma

 
============================================================================================================================Disclaimer:  This message and the information contained herein is proprietary and confidential and subject to the Tech Mahindra policy statement, you may review the policy at <a href="http://www.techmahindra.com/Disclaimer.html">http://www.techmahindra.com/Disclaimer.html</a> externally and <a href="http://tim.techmahindra.com/Disclaimer.html">http://tim.techmahindra.com/Disclaimer.html</a> internally within Tech Mahindra.============================================================================================================================


From surfprasanna at gmail.com  Sat Feb 11 06:03:49 2012
From: surfprasanna at gmail.com (prasanna kumar)
Date: Sat, 11 Feb 2012 00:03:49 -0500
Subject: [OpenIMSCore-Users] Installing parlayX in OpencoreIMS
Message-ID: <CA+3+JvTS7K_Ej1Qpfmvqeu0cM6u4fa+SpVnA_S+6N+BB0pu-bA@mail.gmail.com>

Hello,

I am Prasanna. I am trying to install parlayX into an IMS test bed. I
found from the Fokus site that , their implemention of OpenCoreIMS has
parlayx webservice in it. I have installed OpencoreIMs on my laptop
but I am not able to find how to see if ParlayX is installed. If it is
not installed by default, Is it available as a separate package . How
do I install it?

Thanks for your help,
Prasanna


From franz.edler at technikum-wien.at  Sun Feb 12 08:12:05 2012
From: franz.edler at technikum-wien.at (Franz Edler)
Date: Sun, 12 Feb 2012 08:12:05 +0100
Subject: [OpenIMSCore-Users] Installing parlayX in OpencoreIMS
In-Reply-To: <CA+3+JvTS7K_Ej1Qpfmvqeu0cM6u4fa+SpVnA_S+6N+BB0pu-bA@mail.gmail.com>
References: <CA+3+JvTS7K_Ej1Qpfmvqeu0cM6u4fa+SpVnA_S+6N+BB0pu-bA@mail.gmail.com>
Message-ID: <000301cce955$a0607630$e1216290$@technikum-wien.at>

Hi Prasanna, 

> I am Prasanna. I am trying to install parlayX into an IMS test bed. I
> found from the Fokus site that , their implemention of OpenCoreIMS has
> parlayx webservice in it. I have installed OpencoreIMs on my laptop
> but I am not able to find how to see if ParlayX is installed. If it is
> not installed by default, Is it available as a separate package . How
> do I install it?

ParlayX is not available in OpenIMSCore. Maybe it is available at Fraunhofer
FOKUS, but probably not for free.

BR
Franz



From surfprasanna at gmail.com  Sun Feb 12 16:51:42 2012
From: surfprasanna at gmail.com (prasanna kumar)
Date: Sun, 12 Feb 2012 10:51:42 -0500
Subject: [OpenIMSCore-Users] Installing parlayX in OpencoreIMS
In-Reply-To: <000301cce955$a0607630$e1216290$@technikum-wien.at>
References: <CA+3+JvTS7K_Ej1Qpfmvqeu0cM6u4fa+SpVnA_S+6N+BB0pu-bA@mail.gmail.com>
	<000301cce955$a0607630$e1216290$@technikum-wien.at>
Message-ID: <CA+3+JvS5HO5E+MWK9C+vCKCxo=yxoZYF5Q5RKFGcN0WHvOZHCg@mail.gmail.com>

Thanks Franz. I will check that option

Thanks,
Prasanna

On Sun, Feb 12, 2012 at 2:12 AM, Franz Edler
<franz.edler at technikum-wien.at> wrote:
> Hi Prasanna,
>
>> I am Prasanna. I am trying to install parlayX into an IMS test bed. I
>> found from the Fokus site that , their implemention of OpenCoreIMS has
>> parlayx webservice in it. I have installed OpencoreIMs on my laptop
>> but I am not able to find how to see if ParlayX is installed. If it is
>> not installed by default, Is it available as a separate package . How
>> do I install it?
>
> ParlayX is not available in OpenIMSCore. Maybe it is available at Fraunhofer
> FOKUS, but probably not for free.
>
> BR
> Franz
>


From surfprasanna at gmail.com  Sun Feb 12 17:27:04 2012
From: surfprasanna at gmail.com (prasanna kumar)
Date: Sun, 12 Feb 2012 11:27:04 -0500
Subject: [OpenIMSCore-Users] Installing parlayX in OpencoreIMS
In-Reply-To: <CA+3+JvS5HO5E+MWK9C+vCKCxo=yxoZYF5Q5RKFGcN0WHvOZHCg@mail.gmail.com>
References: <CA+3+JvTS7K_Ej1Qpfmvqeu0cM6u4fa+SpVnA_S+6N+BB0pu-bA@mail.gmail.com>
	<000301cce955$a0607630$e1216290$@technikum-wien.at>
	<CA+3+JvS5HO5E+MWK9C+vCKCxo=yxoZYF5Q5RKFGcN0WHvOZHCg@mail.gmail.com>
Message-ID: <CA+3+JvQeMYeh=sk_i_mvbg-hjTqTg8p=GVdHYhS5DWzhMe7YAQ@mail.gmail.com>

Hello Franz,

The FOKUS group says that ParlayX is part of the Open IMS playground

http://www.fokus.fraunhofer.de/en/fokus_testbeds/open_ims_playground/components/osims/index.html

So does it mean that, the Open IMS playground consists of the
OpenIMSCore which is free and the ParlayX and other commercial
products which are not available for free?.

Thanks,
Prasanna

On Sun, Feb 12, 2012 at 10:51 AM, prasanna kumar <surfprasanna at gmail.com> wrote:
> Thanks Franz. I will check that option
>
> Thanks,
> Prasanna
>
> On Sun, Feb 12, 2012 at 2:12 AM, Franz Edler
> <franz.edler at technikum-wien.at> wrote:
>> Hi Prasanna,
>>
>>> I am Prasanna. I am trying to install parlayX into an IMS test bed. I
>>> found from the Fokus site that , their implemention of OpenCoreIMS has
>>> parlayx webservice in it. I have installed OpencoreIMs on my laptop
>>> but I am not able to find how to see if ParlayX is installed. If it is
>>> not installed by default, Is it available as a separate package . How
>>> do I install it?
>>
>> ParlayX is not available in OpenIMSCore. Maybe it is available at Fraunhofer
>> FOKUS, but probably not for free.
>>
>> BR
>> Franz
>>


From franz.edler at technikum-wien.at  Sun Feb 12 21:52:47 2012
From: franz.edler at technikum-wien.at (Franz Edler)
Date: Sun, 12 Feb 2012 21:52:47 +0100
Subject: [OpenIMSCore-Users] Installing parlayX in OpencoreIMS
In-Reply-To: <CA+3+JvQeMYeh=sk_i_mvbg-hjTqTg8p=GVdHYhS5DWzhMe7YAQ@mail.gmail.com>
References: <CA+3+JvTS7K_Ej1Qpfmvqeu0cM6u4fa+SpVnA_S+6N+BB0pu-bA@mail.gmail.com>	<000301cce955$a0607630$e1216290$@technikum-wien.at>	<CA+3+JvS5HO5E+MWK9C+vCKCxo=yxoZYF5Q5RKFGcN0WHvOZHCg@mail.gmail.com>
	<CA+3+JvQeMYeh=sk_i_mvbg-hjTqTg8p=GVdHYhS5DWzhMe7YAQ@mail.gmail.com>
Message-ID: <000501cce9c8$4740c5a0$d5c250e0$@technikum-wien.at>

> The FOKUS group says that ParlayX is part of the Open IMS playground
> 
> http://www.fokus.fraunhofer.de/en/fokus_testbeds/open_ims_playgroun
> d/components/osims/index.html
> 
> So does it mean that, the Open IMS playground consists of the OpenIMSCore
> which is free and the ParlayX and other commercial products which are not
> available for free?

Yes, I think that's the business model of Fraunhofer FOKUS.

BR
Franz



From surfprasanna at gmail.com  Sun Feb 12 22:20:37 2012
From: surfprasanna at gmail.com (prasanna kumar)
Date: Sun, 12 Feb 2012 16:20:37 -0500
Subject: [OpenIMSCore-Users] Installing parlayX in OpencoreIMS
In-Reply-To: <000501cce9c8$4740c5a0$d5c250e0$@technikum-wien.at>
References: <CA+3+JvTS7K_Ej1Qpfmvqeu0cM6u4fa+SpVnA_S+6N+BB0pu-bA@mail.gmail.com>
	<000301cce955$a0607630$e1216290$@technikum-wien.at>
	<CA+3+JvS5HO5E+MWK9C+vCKCxo=yxoZYF5Q5RKFGcN0WHvOZHCg@mail.gmail.com>
	<CA+3+JvQeMYeh=sk_i_mvbg-hjTqTg8p=GVdHYhS5DWzhMe7YAQ@mail.gmail.com>
	<000501cce9c8$4740c5a0$d5c250e0$@technikum-wien.at>
Message-ID: <CA+3+JvTGB5FWw0NoHiQd2D3idH709X117ht+UNLyMkGE5XqFSQ@mail.gmail.com>

Thanks Franz for you immediate response.

So , Is there any open source implementation of ParlayX (by any body
else) that I can download and integrate with the OpenIMSCore ? The
documentation by Fokus mentions that , the have tested OpenIMScore
with ParlayX gateways.  I will try to manually do that if any open
source implementation of ParlayX is available. kindly guide me.

The aim of my activity to have openIMSCore and ParlayX running on my
Laptop. Kindly suggest alternative approaches if any .

Thank you,
Prasanna


On Sun, Feb 12, 2012 at 3:52 PM, Franz Edler
<franz.edler at technikum-wien.at> wrote:
>> The FOKUS group says that ParlayX is part of the Open IMS playground
>>
>> http://www.fokus.fraunhofer.de/en/fokus_testbeds/open_ims_playgroun
>> d/components/osims/index.html
>>
>> So does it mean that, the Open IMS playground consists of the OpenIMSCore
>> which is free and the ParlayX and other commercial products which are not
>> available for free?
>
> Yes, I think that's the business model of Fraunhofer FOKUS.
>
> BR
> Franz
>


From java1652_anva at hotmail.com  Thu Feb 23 19:09:37 2012
From: java1652_anva at hotmail.com (=?iso-8859-1?B?QW5kculzIFZhbGxlam8gQXZlbGxhbmVkYQ==?=)
Date: Thu, 23 Feb 2012 13:09:37 -0500
Subject: [OpenIMSCore-Users] Question about Open IMS Core
In-Reply-To: <BLU168-W49A87115D1DC9A2AE07B2594650@phx.gbl>
References: <BLU168-W49A87115D1DC9A2AE07B2594650@phx.gbl>
Message-ID: <BLU168-W32382FE623AB0A2E59A95794650@phx.gbl>


Hi.I'm interested in implementing an IPTV platform for my University.I want to work with a server, a switch and a router. Finally I will use three tv's with their respective set-top boxes.
Now I want to know if is possible to use the Open IMS core for this topology. Or if it have its own topology.
In the other hand I want to know if is possible to use Set-Top boxes or it only works with PC's
Thanks Sorry for my english  		 	   		   		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.berlios.de/pipermail/openimscore-users/attachments/20120223/2e18e3f7/attachment.html>

From philip.marquis at yahoo.com  Fri Feb 24 05:09:39 2012
From: philip.marquis at yahoo.com (Philip Marquis)
Date: Thu, 23 Feb 2012 20:09:39 -0800 (PST)
Subject: [OpenIMSCore-Users] OPENIMSCORE ?
In-Reply-To: <mailman.45.1323169207.9519.openimscore-users@lists.berlios.de>
References: <mailman.45.1323169207.9519.openimscore-users@lists.berlios.de>
Message-ID: <1330056579.84961.YahooMailNeo@web32506.mail.mud.yahoo.com>

Is openimscore 'dead'? ? I noticed the SER web page is 'dead' links and the website seem to be so outdate its a shame.

I am only asking as I am looking for code but cannot figure out how big the community is ?

Thanks for any advice on where the everyone is gathering and discussing 






________________________________
 From: "openimscore-users-request at lists.berlios.de" <openimscore-users-request at lists.berlios.de>
To: openimscore-users at lists.berlios.de 
Sent: Tuesday, December 6, 2011 3:00 AM
Subject: OpenIMSCore-Users Digest, Vol 62, Issue 2
 
Send OpenIMSCore-Users mailing list submissions to
??? openimscore-users at lists.berlios.de

To subscribe or unsubscribe via the World Wide Web, visit
??? https://lists.berlios.de/mailman/listinfo/openimscore-users
or, via email, send a message with subject or body 'help' to
??? openimscore-users-request at lists.berlios.de

You can reach the person managing the list at
??? openimscore-users-owner at lists.berlios.de

When replying, please edit your Subject line so it is more specific
than "Re: Contents of OpenIMSCore-Users digest..."


Today's Topics:

?  1. I am my own boss!! (? ?)
?  2. Re: Error launching scscf.sh and icsscf.sh (Yvon Colin)


----------------------------------------------------------------------

Message: 1
Date: Tue, 6 Dec 2011 00:52:52 +0800 (CST)
From: ? ? <siph323voip at yahoo.com.cn>
To: "join at huawei.com" <join at huawei.com>,??? "zhiling.fan at nsn.com"
??? <zhiling.fan at nsn.com>,??? "wangpeibing at huawei.com"
??? <wangpeibing at huawei.com>,??? "jianhwu at cisco.com" <jianhwu at cisco.com>,
??? "iqbal.telekom at gmail.com" <iqbal.telekom at gmail.com>,
??? "openimscore-users at lists.berlios.de"
??? <openimscore-users at lists.berlios.de>
Subject: [OpenIMSCore-Users] I am my own boss!!
Message-ID:
??? <1323103972.10292.androidMobile at web15704.mail.cnb.yahoo.com>
Content-Type: text/plain; charset="gb2312"

<p>Hello...<br>literally don't worry about your next incoming bill<br><a href="http://saltacumbiaa.com.ar/profile/77CarlBailey/">http://saltacumbiaa.com.ar/profile/77CarlBailey/</a><br>see you later</p>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.berlios.de/pipermail/openimscore-users/attachments/20111206/5932657d/attachment-0001.html>

------------------------------

Message: 2
Date: Tue, 6 Dec 2011 09:06:45 +0100
From: Yvon Colin <colin.yvon at gmail.com>
To: Tommaso Nicoletti <selfesteem84 at yahoo.it>
Cc: "openimscore-users at lists.berlios.de"
??? <openimscore-users at lists.berlios.de>
Subject: Re: [OpenIMSCore-Users] Error launching scscf.sh and
??? icsscf.sh
Message-ID:
??? <CANg1JWWLD2iyqpOWt=HY8RWtO1gY4M0Of9Xn_A+SEwx-qOvZ2g at mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"

Try to change the log level set it to debug that can be helpful!


2011/11/30 Tommaso Nicoletti <selfesteem84 at yahoo.it>

> Hi All,
> I'm new to OpenIMScore, I did the 5 steps of the installation guide with
> success. So I tried to start all CSCFs components.
>
> pcscf? - no problem
>
> scscf - problem
> here the command line result:
>
> studio5 at lab-studio5 /opt/OpenIMSCore $ ./scscf.sh
>? 0(10459) ERROR: load_module: could not open module
> </opt/OpenIMSCore/ser_ims/modules/cdp/cdp.so>:
> /opt/OpenIMSCore/ser_ims/modules/cdp/cdp.so: undefined symbol: sem_post
>? 0(10459) parse error (114,13-14): failed to load module
>? 0(10459) set_mod_param_regex: No module matching <cdp> found
>? 0(10459) parse error (115,18-19): Can't set module parameter
> ERROR: bad config file (2 errors)
>? 0(10459) INFO:ISC: - child exit
>? 0(10459) INFO:S-CSCF:mod_destroy: child exit
> ./scscf.sh: riga 6: 10459 Errore di segmentazione
> LD_LIBRARY_PATH=/usr/local/lib/ser /opt/OpenIMSCore/ser_ims/ser -f
> /opt/OpenIMSCore/scscf.cfg -D -D
>
> ------ Matrici semafori --------
> chiave? ?  semid? ? ? proprietario perms? ? ? nsems
> 0xcbc384f8 98305? ? ? studio5? ? 600? ? ? ? 1
>
> icscf - problem
> here the command line result:
>
> studio5 at lab-studio5 /opt/OpenIMSCore $ ./icscf.sh
>? 0(10469) ERROR: load_module: could not open module
> </opt/OpenIMSCore/ser_ims/modules/cdp/cdp.so>:
> /opt/OpenIMSCore/ser_ims/modules/cdp/cdp.so: undefined symbol: sem_post
>? 0(10469) parse error (63,13-14): failed to load module
>? 0(10469) set_mod_param_regex: No module matching <cdp> found
>? 0(10469) parse error (64,18-19): Can't set module parameter
> ERROR: bad config file (2 errors)
>? 0(10469) INFO:I-CSCF:mod_destroy: child exit
> ./icscf.sh: riga 4: 10469 Errore di segmentazione
> /opt/OpenIMSCore/ser_ims/ser -f /opt/OpenIMSCore/icscf.cfg -D -D
>
> ------ Matrici semafori --------
> chiave? ?  semid? ? ? proprietario perms? ? ? nsems
> 0xcbc384f8 98305? ? ? studio5? ? 600? ? ? ? 1
>
>
> I'm using Linux Mint 12, I also tried with Ubuntu 11.10, but I get the
> same error. I tried to solve the problem looking for someone with the same
> error output, but nothing.
> The only one with the same output was
>
> http://lists.berlios.de/pipermail/openimscore-users/2011-October/007168.html
> I also try to reinstall and check the log file installations, but no way
> to solve my error.
> Any idea with the problem?
> Best regards
> Tommaso
>
> _______________________________________________
> OpenIMSCore-Users mailing list
> OpenIMSCore-Users at lists.berlios.de
> https://lists.berlios.de/mailman/listinfo/openimscore-users
>
>


-- 
Yvon
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.berlios.de/pipermail/openimscore-users/attachments/20111206/03fffc6e/attachment-0001.html>

------------------------------

_______________________________________________
OpenIMSCore-Users mailing list
OpenIMSCore-Users at lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openimscore-users


End of OpenIMSCore-Users Digest, Vol 62, Issue 2
************************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.berlios.de/pipermail/openimscore-users/attachments/20120223/e61bb594/attachment.html>

From franz.edler at technikum-wien.at  Fri Feb 24 05:16:59 2012
From: franz.edler at technikum-wien.at (Franz Edler)
Date: Fri, 24 Feb 2012 05:16:59 +0100
Subject: [OpenIMSCore-Users] Question about Open IMS Core
In-Reply-To: <BLU168-W32382FE623AB0A2E59A95794650@phx.gbl>
References: <BLU168-W49A87115D1DC9A2AE07B2594650@phx.gbl>
	<BLU168-W32382FE623AB0A2E59A95794650@phx.gbl>
Message-ID: <002701ccf2ab$276e9630$764bc290$@technikum-wien.at>

Hello,

> I'm interested in implementing an IPTV platform for my University.
> I want to work with a server, a switch and a router. Finally I will use
three tv's
> with their respective set-top boxes.
> 
> Now I want to know if is possible to use the Open IMS core for this
topology.
> Or if it have its own topology.
OpenIMScore supports all interfaces for IP-TV according to the architecture
defined in ETSI TS 182 027.

> In the other hand I want to know if is possible to use Set-Top boxes or it
only works with PC's
Yes. There is no impact on the core regarding this question.

BR
Franz



From java1652_anva at hotmail.com  Fri Feb 24 05:45:59 2012
From: java1652_anva at hotmail.com (=?iso-8859-1?B?QW5kculzIFZhbGxlam8gQXZlbGxhbmVkYQ==?=)
Date: Thu, 23 Feb 2012 23:45:59 -0500
Subject: [OpenIMSCore-Users] Question IPTV
Message-ID: <BLU168-W43848493DDE90F3DB9A6E6946A0@phx.gbl>


HelloI've saw that the installation of the UCT IMS client has been in a PC. I've saw the EPG, VOD and more in an graphic interface of Linux.But if I want to replace the pc for a set-top box, how can I install the software in it. There is some support for that?
Or no need to install software on the Set-top box. Do I need any reference of STB in particular? 
 
Thanks 
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.berlios.de/pipermail/openimscore-users/attachments/20120223/e2ed9cfa/attachment.html>

From fftxffty at gmail.com  Fri Feb 24 13:08:05 2012
From: fftxffty at gmail.com (lux 11)
Date: Fri, 24 Feb 2012 13:08:05 +0100
Subject: [OpenIMSCore-Users] cannot establish call between clients
Message-ID: <CAAhxyKKROHPoPCgwx15QfLW-HH+nnXvMWVPuDo8CGcgo4tR5GA@mail.gmail.com>

Hello,
I am trying to make a voice call betwen two clients(monster TCS).
Registration is ok, i've managed to subscribe 2 users, but when i try the
voice call i get message "408-Request timed out"
I also installed and connected mobicents sip presence server through HSS
web console.
I am sending a trace file.
Thanks for assistance
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.berlios.de/pipermail/openimscore-users/attachments/20120224/2b147d00/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: tracefile3.pcap
Type: application/octet-stream
Size: 367107 bytes
Desc: not available
URL: <https://lists.berlios.de/pipermail/openimscore-users/attachments/20120224/2b147d00/attachment.obj>

From steve_hoscheid at ept.lu  Fri Feb 24 13:39:20 2012
From: steve_hoscheid at ept.lu (Steve Hoscheid)
Date: Fri, 24 Feb 2012 13:39:20 +0100
Subject: [OpenIMSCore-Users] AUTO: Steve Hoscheid is out of the office
	(returning 27/02/2012)
Message-ID: <OF8820539D.9223AAF5-ONC12579AE.0045853B-C12579AE.0045853B@ept.lu>



I am out of the office until 27/02/2012.




Note: This is an automated response to your message  "OpenIMSCore-Users
Digest, Vol 64, Issue 7" sent on 24/02/2012 13:08:08.

This is the only notification you will receive while this person is away.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.berlios.de/pipermail/openimscore-users/attachments/20120224/ed9e4913/attachment.html>

From java1652_anva at hotmail.com  Fri Feb 24 16:13:42 2012
From: java1652_anva at hotmail.com (=?iso-8859-1?B?QW5kculzIFZhbGxlam8gQXZlbGxhbmVkYQ==?=)
Date: Fri, 24 Feb 2012 10:13:42 -0500
Subject: [OpenIMSCore-Users] Question IPTV
Message-ID: <BLU168-W61588A9267AD09AADC55D6946A0@phx.gbl>


HelloI've saw that the installation of the UCT IMS client has been in a PC. I've saw the EPG, VOD and more in an graphic interface of Linux.But if I want to replace the pc for a set-top box, how can I install the software in it. There is some support for that?Or no need to install software on the Set-top box. Do I need any reference of STB in particular? Thanks  		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.berlios.de/pipermail/openimscore-users/attachments/20120224/8fb08f8b/attachment.html>

From colin.yvon at gmail.com  Fri Feb 24 17:26:08 2012
From: colin.yvon at gmail.com (Yvon Colin)
Date: Fri, 24 Feb 2012 17:26:08 +0100
Subject: [OpenIMSCore-Users] OPENIMSCORE ?
In-Reply-To: <1330056579.84961.YahooMailNeo@web32506.mail.mud.yahoo.com>
References: <mailman.45.1323169207.9519.openimscore-users@lists.berlios.de>
	<1330056579.84961.YahooMailNeo@web32506.mail.mud.yahoo.com>
Message-ID: <CANg1JWVN34=TTDPvuA8_PJkTVWcMAAb1EowdGsUUJwr-+RxJhw@mail.gmail.com>

Hi Philip,
Basically IMS is dead from a research perspective at FOCUS! But the OPENIMS
project is not dead of course :). It's a community effort and anyone can
extend, change or fix it.
So let's keep it up!
Best regards,

Le 24 f?vrier 2012 05:09, Philip Marquis <philip.marquis at yahoo.com> a ?crit
:

> Is openimscore 'dead'  ? I noticed the SER web page is 'dead' links and
> the website seem to be so outdate its a shame.
>
> I am only asking as I am looking for code but cannot figure out how big
> the community is ?
>
> Thanks for any advice on where the everyone is gathering and discussing
>
>
>
>
>   ------------------------------
> *From:* "openimscore-users-request at lists.berlios.de" <
> openimscore-users-request at lists.berlios.de>
> *To:* openimscore-users at lists.berlios.de
> *Sent:* Tuesday, December 6, 2011 3:00 AM
> *Subject:* OpenIMSCore-Users Digest, Vol 62, Issue 2
>
> Send OpenIMSCore-Users mailing list submissions to
>     openimscore-users at lists.berlios.de
>
> To subscribe or unsubscribe via the World Wide Web, visit
>     https://lists.berlios.de/mailman/listinfo/openimscore-users
> or, via email, send a message with subject or body 'help' to
>     openimscore-users-request at lists.berlios.de
>
> You can reach the person managing the list at
>     openimscore-users-owner at lists.berlios.de
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of OpenIMSCore-Users digest..."
>
>
> Today's Topics:
>
>   1. I am my own boss!! (? ?)
>   2. Re: Error launching scscf.sh and icsscf.sh (Yvon Colin)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 6 Dec 2011 00:52:52 +0800 (CST)
> From: ? ? <siph323voip at yahoo.com.cn>
> To: "join at huawei.com" <join at huawei.com>,    "zhiling.fan at nsn.com"
>     <zhiling.fan at nsn.com>,    "wangpeibing at huawei.com"
>     <wangpeibing at huawei.com>,    "jianhwu at cisco.com" <jianhwu at cisco.com>,
>     "iqbal.telekom at gmail.com" <iqbal.telekom at gmail.com>,
>     "openimscore-users at lists.berlios.de"
>     <openimscore-users at lists.berlios.de>
> Subject: [OpenIMSCore-Users] I am my own boss!!
> Message-ID:
>     <1323103972.10292.androidMobile at web15704.mail.cnb.yahoo.com>
> Content-Type: text/plain; charset="gb2312"
>
> <p>Hello...<br>literally don't worry about your next incoming bill<br><a
> href="http://saltacumbiaa.com.ar/profile/77CarlBailey/">
> http://saltacumbiaa.com.ar/profile/77CarlBailey/</a><br>see you later</p>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> https://lists.berlios.de/pipermail/openimscore-users/attachments/20111206/5932657d/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 2
> Date: Tue, 6 Dec 2011 09:06:45 +0100
> From: Yvon Colin <colin.yvon at gmail.com>
> To: Tommaso Nicoletti <selfesteem84 at yahoo.it>
> Cc: "openimscore-users at lists.berlios.de"
>     <openimscore-users at lists.berlios.de>
> Subject: Re: [OpenIMSCore-Users] Error launching scscf.sh and
>     icsscf.sh
> Message-ID:
>     <CANg1JWWLD2iyqpOWt=HY8RWtO1gY4M0Of9Xn_A+SEwx-qOvZ2g at mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Try to change the log level set it to debug that can be helpful!
>
>
> 2011/11/30 Tommaso Nicoletti <selfesteem84 at yahoo.it>
>
> > Hi All,
> > I'm new to OpenIMScore, I did the 5 steps of the installation guide with
> > success. So I tried to start all CSCFs components.
> >
> > pcscf  - no problem
> >
> > scscf - problem
> > here the command line result:
> >
> > studio5 at lab-studio5 /opt/OpenIMSCore $ ./scscf.sh
> >  0(10459) ERROR: load_module: could not open module
> > </opt/OpenIMSCore/ser_ims/modules/cdp/cdp.so>:
> > /opt/OpenIMSCore/ser_ims/modules/cdp/cdp.so: undefined symbol: sem_post
> >  0(10459) parse error (114,13-14): failed to load module
> >  0(10459) set_mod_param_regex: No module matching <cdp> found
> >  0(10459) parse error (115,18-19): Can't set module parameter
> > ERROR: bad config file (2 errors)
> >  0(10459) INFO:ISC: - child exit
> >  0(10459) INFO:S-CSCF:mod_destroy: child exit
> > ./scscf.sh: riga 6: 10459 Errore di segmentazione
> > LD_LIBRARY_PATH=/usr/local/lib/ser /opt/OpenIMSCore/ser_ims/ser -f
> > /opt/OpenIMSCore/scscf.cfg -D -D
> >
> > ------ Matrici semafori --------
> > chiave    semid      proprietario perms      nsems
> > 0xcbc384f8 98305      studio5    600        1
> >
> > icscf - problem
> > here the command line result:
> >
> > studio5 at lab-studio5 /opt/OpenIMSCore $ ./icscf.sh
> >  0(10469) ERROR: load_module: could not open module
> > </opt/OpenIMSCore/ser_ims/modules/cdp/cdp.so>:
> > /opt/OpenIMSCore/ser_ims/modules/cdp/cdp.so: undefined symbol: sem_post
> >  0(10469) parse error (63,13-14): failed to load module
> >  0(10469) set_mod_param_regex: No module matching <cdp> found
> >  0(10469) parse error (64,18-19): Can't set module parameter
> > ERROR: bad config file (2 errors)
> >  0(10469) INFO:I-CSCF:mod_destroy: child exit
> > ./icscf.sh: riga 4: 10469 Errore di segmentazione
> > /opt/OpenIMSCore/ser_ims/ser -f /opt/OpenIMSCore/icscf.cfg -D -D
> >
> > ------ Matrici semafori --------
> > chiave    semid      proprietario perms      nsems
> > 0xcbc384f8 98305      studio5    600        1
> >
> >
> > I'm using Linux Mint 12, I also tried with Ubuntu 11.10, but I get the
> > same error. I tried to solve the problem looking for someone with the
> same
> > error output, but nothing.
> > The only one with the same output was
> >
> >
> http://lists.berlios.de/pipermail/openimscore-users/2011-October/007168.html
> > I also try to reinstall and check the log file installations, but no way
> > to solve my error.
> > Any idea with the problem?
> > Best regards
> > Tommaso
> >
> > _______________________________________________
> > OpenIMSCore-Users mailing list
> > OpenIMSCore-Users at lists.berlios.de
> > https://lists.berlios.de/mailman/listinfo/openimscore-users
> >
> >
>
>
> --
> Yvon
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> https://lists.berlios.de/pipermail/openimscore-users/attachments/20111206/03fffc6e/attachment-0001.html
> >
>
> ------------------------------
>
> _______________________________________________
> OpenIMSCore-Users mailing list
> OpenIMSCore-Users at lists.berlios.de
> https://lists.berlios.de/mailman/listinfo/openimscore-users
>
>
> End of OpenIMSCore-Users Digest, Vol 62, Issue 2
> ************************************************
>
>
>
> _______________________________________________
> OpenIMSCore-Users mailing list
> OpenIMSCore-Users at lists.berlios.de
> https://lists.berlios.de/mailman/listinfo/openimscore-users
>
>


-- 
Yvon
Please consider the environment !
          Do you really need to print this email ?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.berlios.de/pipermail/openimscore-users/attachments/20120224/f90d1323/attachment.html>

From franz.edler at technikum-wien.at  Fri Feb 24 22:22:22 2012
From: franz.edler at technikum-wien.at (Franz Edler)
Date: Fri, 24 Feb 2012 22:22:22 +0100
Subject: [OpenIMSCore-Users] cannot establish call between clients
In-Reply-To: <CAAhxyKKROHPoPCgwx15QfLW-HH+nnXvMWVPuDo8CGcgo4tR5GA@mail.gmail.com>
References: <CAAhxyKKROHPoPCgwx15QfLW-HH+nnXvMWVPuDo8CGcgo4tR5GA@mail.gmail.com>
Message-ID: <015701ccf33a$65c20a90$31461fb0$@technikum-wien.at>

Hi,

 

I think the problem may be caused by not successfully de-registering  Alice
before your test.

When you look at packet 74 (REGISTER) and 79 (200 OK on REGISTER) you will
see that S-CSCF includes 2 contact addresses where "192.168.1.121:51125"
stems from a registration not valid anymore.

This leads to forking where one address is unresponsive.

 

I suggest you repeat the test with a clean registration state.

 

BR

Franz

 

From: openimscore-users-bounces at lists.berlios.de
[mailto:openimscore-users-bounces at lists.berlios.de] On Behalf Of lux 11
Sent: Friday, February 24, 2012 1:08 PM
To: openimscore-users at lists.berlios.de
Subject: [OpenIMSCore-Users] cannot establish call between clients

 

Hello,
I am trying to make a voice call betwen two clients(monster TCS). 
Registration is ok, i've managed to subscribe 2 users, but when i try the
voice call i get message "408-Request timed out"
I also installed and connected mobicents sip presence server through HSS web
console.
I am sending a trace file.
Thanks for assistance

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.berlios.de/pipermail/openimscore-users/attachments/20120224/a4a488a3/attachment.html>

From colin.yvon at gmail.com  Mon Feb 27 09:37:30 2012
From: colin.yvon at gmail.com (Yvon Colin)
Date: Mon, 27 Feb 2012 09:37:30 +0100
Subject: [OpenIMSCore-Users] Question IPTV
In-Reply-To: <BLU168-W61588A9267AD09AADC55D6946A0@phx.gbl>
References: <BLU168-W61588A9267AD09AADC55D6946A0@phx.gbl>
Message-ID: <CANg1JWXPPUtKyemR_3LUF-xcqxhmHvoMpZqtpBbRsu47GhwKuw@mail.gmail.com>

Hi Andr?s Vallejo Avellaneda,
I have know idea but i your project clever. I wanna add that Sometimes the
best way to know is to try. So try and you will see.
Let us know!
Best Regards,
Le 24 f?vrier 2012 16:13, Andr?s Vallejo Avellaneda <
java1652_anva at hotmail.com> a ?crit :

>  Hello
>
> I've saw that the installation of the UCT IMS client has been in a PC. I've saw the EPG, VOD and more in an graphic interface of Linux.But if I want to replace the pc for a set-top box, how can I install the software in it. There is some support for that?
>
> Or no need to install software on the Set-top box. Do I need any reference of STB in particular?
>
> Thanks
>
>
> _______________________________________________
> OpenIMSCore-Users mailing list
> OpenIMSCore-Users at lists.berlios.de
> https://lists.berlios.de/mailman/listinfo/openimscore-users
>
>


-- 
Yvon
Please consider the environment !
          Do you really need to print this email ?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.berlios.de/pipermail/openimscore-users/attachments/20120227/1914f45c/attachment.html>

From PS0083124 at TechMahindra.com  Mon Feb 27 09:47:59 2012
From: PS0083124 at TechMahindra.com (Peeyush.3.Sharma)
Date: Mon, 27 Feb 2012 14:17:59 +0530
Subject: [OpenIMSCore-Users] Regarding the clf.open-ims.test module
Message-ID: <C86CA6B754CC444FAED01331196CA25659C11A2B68@SINNODMBX001.TechMahindra.com>


Hi Everybody,

I have installed the latest build of the openimscore on a linux machine.
I am trying to register a user using uct-ims client on the ims network and I am also using a pcrf component.
Whenever I try to register any user on the network it gives an error for clf.open-ims.test and says peer not connected.
I checked every module to find something about clf.open-ims.test, however I was not able to figure out what is its purpose and how can I configure it.

Thanks & Regards,
Peeyush Sharma
============================================================================================================================Disclaimer:  This message and the information contained herein is proprietary and confidential and subject to the Tech Mahindra policy statement, you may review the policy at <a href="http://www.techmahindra.com/Disclaimer.html">http://www.techmahindra.com/Disclaimer.html</a> externally and <a href="http://tim.techmahindra.com/Disclaimer.html">http://tim.techmahindra.com/Disclaimer.html</a> internally within Tech Mahindra.============================================================================================================================


From franz.edler at technikum-wien.at  Mon Feb 27 21:43:21 2012
From: franz.edler at technikum-wien.at (Franz Edler)
Date: Mon, 27 Feb 2012 21:43:21 +0100
Subject: [OpenIMSCore-Users] Regarding the clf.open-ims.test module
In-Reply-To: <C86CA6B754CC444FAED01331196CA25659C11A2B68@SINNODMBX001.TechMahindra.com>
References: <C86CA6B754CC444FAED01331196CA25659C11A2B68@SINNODMBX001.TechMahindra.com>
Message-ID: <002101ccf590$71d43490$557c9db0$@technikum-wien.at>

Hi Peeyush,

> I checked every module to find something about clf.open-ims.test, however
> I was not able to figure out what is its purpose and how can I configure
it.

The CLF(Connectivity Location Function)  is defined in ETSI ES 282 004.
P-CSCF communicates with CLF via e2-interface.
You should deactivate e2-interface in P-CSCF. This should be disabled per
default (see below).

# e2 Interface configuration (NASS-Bundled Authentication)
#modparam("pcscf","forced_clf_peer","clf.net1.test")
modparam("pcscf","use_e2",0)
#modparam("pcscf","use_e2",1

BR
Franz



From saifullah at banglaphone.net.bd  Tue Feb 28 10:09:53 2012
From: saifullah at banglaphone.net.bd (saifullah at banglaphone.net.bd)
Date: Tue, 28 Feb 2012 15:09:53 +0600 (BDT)
Subject: [OpenIMSCore-Users] "600 Busy Everywhere Forwarding to S-CSCF
 failed" while calling from Gaoke IAD
Message-ID: <57181.180.210.191.133.1330420193.squirrel@mail.banglaphone.net.bd>

Dear all

I have successfully registered Gaoke IAD to OpenIMSCore.But when was
trying to make call from Gaoke IAD to X-Lite and other IP Phone the error
is "600 Busy Everywhere Forwarding to S-CSCF failed". Please help me in
solving this problem.

I have attached the corresponding trace file from wireshark.

Thanks & Regards,

Abu Nasar Md. Saifullah
System Engineer, P&D
Bangla Phone Ltd
Phone: +8803593451174
Mobile: +8801722817250
-------------- next part --------------
A non-text attachment was scrubbed...
Name: gaoke-iad-call-trace
Type: application/octet-stream
Size: 16907 bytes
Desc: not available
URL: <https://lists.berlios.de/pipermail/openimscore-users/attachments/20120228/a7eff80f/attachment.obj>

From colin.yvon at gmail.com  Tue Feb 28 11:19:00 2012
From: colin.yvon at gmail.com (Yvon Colin)
Date: Tue, 28 Feb 2012 11:19:00 +0100
Subject: [OpenIMSCore-Users] "600 Busy Everywhere Forwarding to S-CSCF
 failed" while calling from Gaoke IAD
In-Reply-To: <57181.180.210.191.133.1330420193.squirrel@mail.banglaphone.net.bd>
References: <57181.180.210.191.133.1330420193.squirrel@mail.banglaphone.net.bd>
Message-ID: <CANg1JWXxGRUvjScXWf0utrgy5wg2qnzHhYokJiiVN58Xj7v6ug@mail.gmail.com>

Hi,
The user that you are trying to call "<sip:127 at 180.210.191.133> " is not a
registered one buddy.
Try to solve that point first!
BR,

Le 28 f?vrier 2012 10:09, <saifullah at banglaphone.net.bd> a ?crit :

> Dear all
>
> I have successfully registered Gaoke IAD to OpenIMSCore.But when was
> trying to make call from Gaoke IAD to X-Lite and other IP Phone the error
> is "600 Busy Everywhere Forwarding to S-CSCF failed". Please help me in
> solving this problem.
>
> I have attached the corresponding trace file from wireshark.
>
> Thanks & Regards,
>
> Abu Nasar Md. Saifullah
> System Engineer, P&D
> Bangla Phone Ltd
> Phone: +8803593451174
> Mobile: +8801722817250
> _______________________________________________
> OpenIMSCore-Users mailing list
> OpenIMSCore-Users at lists.berlios.de
> https://lists.berlios.de/mailman/listinfo/openimscore-users
>
>


-- 
Yvon
Please consider the environment !
          Do you really need to print this email ?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.berlios.de/pipermail/openimscore-users/attachments/20120228/459b9d07/attachment.html>

From java1652_anva at hotmail.com  Wed Feb 29 01:34:58 2012
From: java1652_anva at hotmail.com (=?iso-8859-1?B?QW5kculzIFZhbGxlam8gQXZlbGxhbmVkYQ==?=)
Date: Tue, 28 Feb 2012 19:34:58 -0500
Subject: [OpenIMSCore-Users] Problem with UCT IMS Client
Message-ID: <BLU168-W431BB0A0338B876104F416946F0@phx.gbl>


Hello
I'm running the Open IMS Core. Now I'm trying to install the UCT IMS Client but I need to install some dependences before. I've already installed several of them but I obtain this message
uctimsclient : Depends: libosip2-3deb (>= 3.0.3) but it is not installableDepends: libavcodec-unstripped-51 but it is not installableDepends: libvlc2 (>= 0.9.4) but it is not installable
I'm using Ubuntu 11.10. How can I solve this problem?
Thanks

 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.berlios.de/pipermail/openimscore-users/attachments/20120228/69941b2c/attachment.html>

From saifullah at banglaphone.net.bd  Wed Feb 29 07:51:03 2012
From: saifullah at banglaphone.net.bd (saifullah at banglaphone.net.bd)
Date: Wed, 29 Feb 2012 12:51:03 +0600 (BDT)
Subject: [OpenIMSCore-Users] "600 Busy Everywhere Forwarding to S-CSCF
 failed" while calling from Gaoke IAD
In-Reply-To: <CANg1JWXxGRUvjScXWf0utrgy5wg2qnzHhYokJiiVN58Xj7v6ug@mail.gmail.com>
References: <57181.180.210.191.133.1330420193.squirrel@mail.banglaphone.net.bd>
	<CANg1JWXxGRUvjScXWf0utrgy5wg2qnzHhYokJiiVN58Xj7v6ug@mail.gmail.com>
Message-ID: <46136.180.210.191.133.1330498263.squirrel@mail.banglaphone.net.bd>

Dear Mr.Yvon Colin,

Thank you for your reply.Now i have successfully registered two numbers
one by domail name and another by IP address.The numbers are
130 at 180.210.191.133 and 125 at bpl-ims.test. Then I made a call from 125 to
130 and the message "403- Dailog not found in S-CSCF or Termination user
not suitable for unregistered services" is shown.The wireshark trace is
attached. Please help me what to do?

BR,

Saifullah


> Hi,
> The user that you are trying to call "<sip:127 at 180.210.191.133> " is not a
> registered one buddy.
> Try to solve that point first!
> BR,
>
> Le 28 f?vrier 2012 10:09, <saifullah at banglaphone.net.bd> a ?crit :
>
>> Dear all
>>
>> I have successfully registered Gaoke IAD to OpenIMSCore.But when was
>> trying to make call from Gaoke IAD to X-Lite and other IP Phone the
>> error
>> is "600 Busy Everywhere Forwarding to S-CSCF failed". Please help me in
>> solving this problem.
>>
>> I have attached the corresponding trace file from wireshark.
>>
>> Thanks & Regards,
>>
>> Abu Nasar Md. Saifullah
>> System Engineer, P&D
>> Bangla Phone Ltd
>> Phone: +8803593451174
>> Mobile: +8801722817250
>> _______________________________________________
>> OpenIMSCore-Users mailing list
>> OpenIMSCore-Users at lists.berlios.de
>> https://lists.berlios.de/mailman/listinfo/openimscore-users
>>
>>
>
>
> --
> Yvon
> Please consider the environment !
>           Do you really need to print this email ?
>


Thanks & Regards,

Abu Nasar Md. Saifullah
System Engineer, P&D
Bangla Phone Ltd
Phone: +8803593451174
Mobile: +8801722817250
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 403-Forbidden
Type: application/octet-stream
Size: 15932 bytes
Desc: not available
URL: <https://lists.berlios.de/pipermail/openimscore-users/attachments/20120229/c3498e50/attachment.obj>

From franz.edler at technikum-wien.at  Wed Feb 29 08:02:51 2012
From: franz.edler at technikum-wien.at (Franz Edler)
Date: Wed, 29 Feb 2012 08:02:51 +0100
Subject: [OpenIMSCore-Users] "600 Busy Everywhere Forwarding to S-CSCF
	failed" while calling from Gaoke IAD
In-Reply-To: <46136.180.210.191.133.1330498263.squirrel@mail.banglaphone.net.bd>
References: <57181.180.210.191.133.1330420193.squirrel@mail.banglaphone.net.bd>	<CANg1JWXxGRUvjScXWf0utrgy5wg2qnzHhYokJiiVN58Xj7v6ug@mail.gmail.com>
	<46136.180.210.191.133.1330498263.squirrel@mail.banglaphone.net.bd>
Message-ID: <001801ccf6b0$26f1a770$74d4f650$@technikum-wien.at>

Hi,

> Thank you for your reply.Now i have successfully registered two numbers
> one by domail name and another by IP address.The numbers are
> 130 at 180.210.191.133 and 125 at bpl-ims.test. Then I made a call from 125 to
> 130 and the message "403- Dailog not found in S-CSCF or Termination user
> not suitable for unregistered services" is shown.The wireshark trace is
> attached. Please help me what to do?

In contrast to SIP it is not possible to use numerical IP-addresses as IMPI
and IMPU. You always have to use a domain name.

BR
Franz



From gebarowski at gmail.com  Wed Feb 29 08:08:08 2012
From: gebarowski at gmail.com (Tomasz Gebarowski)
Date: Wed, 29 Feb 2012 08:08:08 +0100
Subject: [OpenIMSCore-Users] Problem with UCT IMS Client
In-Reply-To: <BLU168-W431BB0A0338B876104F416946F0@phx.gbl>
References: <BLU168-W431BB0A0338B876104F416946F0@phx.gbl>
Message-ID: <4F4DCED8.7020808@gmail.com>

Hello Andr?s,

Unfortunately, the deb packages provided on the UCT IMS client website 
are obsolete and they won't work with the latest Ubuntu version.

Try compiling the client from the source code. Before you do that you 
have to install development packages (those ending with -dev) for all 
the dependencies of UCT IMS client. From what I remember you may expect 
some problems with libvlc2, the UCT IMS client uses some old API which 
is no longer available in the UCT IMS client. In order to compile it I 
had to modify the source code of the UCT IMS client.

If I find my modifications I may send them to you. Anyway, the UCT IMS 
client project doesn't seem to be very mature. From what I noticed the 
project is no longer updated and the client itself could be more a 
testbed than any professional app.

Cheers
--
Tomasz Gebarowski
http://www.myitcorner.com


On 02/29/2012 01:34 AM, Andr?s Vallejo Avellaneda wrote:
> Hello
>
> I'm running the Open IMS Core. Now I'm trying to install the UCT IMS
> Client but I need to install some dependences before. I've already
> installed several of them but I obtain this message
>
> uctimsclient : Depends: libosip2-3deb (>= 3.0.3) but it is not installable
> Depends: libavcodec-unstripped-51 but it is not installable
> Depends: libvlc2 (>= 0.9.4) but it is not installable
>
> I'm using Ubuntu 11.10. How can I solve this problem?
>
> Thanks
>
>
>
>
> _______________________________________________
> OpenIMSCore-Users mailing list
> OpenIMSCore-Users at lists.berlios.de
> https://lists.berlios.de/mailman/listinfo/openimscore-users