[Cdrecord-support] cdrtools-2.01.01.a74 Cannot fixate

[Joerg Schilling]

bill browne <bilie.browne at gmail.com> wrote:

> Joerg,
>
> I managed to find some Verbatim DVD+R DL media
>
> Unfortunately, still the same problem:
>
> DVD seems to burn OK - can see burnt area visually
> Halts with cannot fixate - cdrecord -scanbus can then no longer see
> drive until reboot.
>
> I have included atip and burning log below.
>
> -atip data:

Is this from before or after burning?


> Cdrecord-ProDVD-ProBD-Clone 2.01.01a75 (x86_64-unknown-linux-gnu)
> Copyright (C) 1995-2010 J???rg Schilling
> scsidev: '1,0,0'
> scsibus: 1 target: 0 lun: 0
> Linux sg driver version: 3.5.34
> Using libscg version 'schily-0.9'.
> Device type    : Removable CD-ROM
> Version        : 5
> Response Format: 2
> Capabilities   :
> Vendor_info    : 'TSSTcorp'
> Identifikation : 'CDDVDW SH-S223C '
> Revision       : 'SB01'
> Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
> Using generic SCSI-3/mmc-3 DVD+R driver (mmc_dvdplusr).
> Driver flags   : NO-CD DVD MMC-3 SWABAUDIO BURNFREE
> Supported modes: PACKET SAO LAYER_JUMP
> cdrecord: Warning: Cannot read drive buffer.
> cdrecord: Warning: The DMA speed test has been skipped.
> book type:       DVD+R/DL, Version (14.1)
> disc size:       120mm (0)
> maximum rate:    Not specified (15)
> number of layers:2
> track path:      Opposite Track Path (1)
> layer type:      Rewritable Area (2)
> linear density:  0.293 ???m/bit (1)
> track density:   0.74 ???m/track (0)
> phys start:      196608 (0x30000)
> phys end:        16580607
> end layer 0:     2283519
> bca:             0
> phys size:...    16384000
> layer break at:  2086912

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
This makes me believe it is after burning.

>     Capacity  Blklen/Sparesz.  Format-type  Type
>      4173824             2048         0x00  Unformated or Blank Media

This looks strange.

> ---------------------------------------------
>  # cdrecord -v speed=2 dev=1,0,0 try2.iso
> cdrecord: No write mode specified.
> cdrecord: Assuming -sao mode.
> cdrecord: If your drive does not accept -sao, try -tao.
> cdrecord: Future versions of cdrecord may have different drive
> dependent defaults.
> Cdrecord-ProDVD-ProBD-Clone 2.01.01a75 (x86_64-unknown-linux-gnu)
> Copyright (C) 1995-2010 J???rg Schilling
> TOC Type: 1 = CD-ROM
> scsidev: '1,0,0'
> scsibus: 1 target: 0 lun: 0
> Linux sg driver version: 3.5.34
> Using libscg version 'schily-0.9'.
> SCSI buffer size: 64512
> atapi: 1
> Device type    : Removable CD-ROM
> Version        : 5
> Response Format: 2
> Capabilities   :
> Vendor_info    : 'TSSTcorp'
> Identifikation : 'CDDVDW SH-S223C '
> Revision       : 'SB01'
> Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
> Current: DVD+R/DL
> Profile: DVD+R/DL (current)
> Profile: DVD+R
> Profile: DVD+RW
> Profile: DVD-R/DL layer jump recording
> Profile: DVD-R/DL sequential recording
> Profile: DVD-RW sequential recording
> Profile: DVD-RW restricted overwrite
> Profile: DVD-RAM
> Profile: DVD-R sequential recording
> Profile: DVD-ROM
> Profile: CD-RW
> Profile: CD-R
> Profile: CD-ROM
> Profile: Removable Disk
> Using generic SCSI-3/mmc-3 DVD+R driver (mmc_dvdplusr).
> Driver flags   : NO-CD DVD MMC-3 SWABAUDIO BURNFREE
> Supported modes: PACKET SAO LAYER_JUMP
> Drive buf size : 1048576 = 1024 KB
> cdrecord: Warning: Cannot read drive buffer.
> cdrecord: Warning: The DMA speed test has been skipped.
> FIFO size      : 4194304 = 4096 KB
> Track 01: data  8038 MB
> Total size:     8038 MB = 4115609 sectors
> Current Secsize: 2048
> Blocks total: 4173824 Blocks current: 4173824 Blocks remaining: 58215
> Reducing transfer size from 64512 to 32768 bytes.
> Starting to write CD/DVD/BD at speed 4 in real SAO mode for single session.
> Last chance to quit, starting real write    0 seconds. Operation starts.
> Waiting for reader process to fill input buffer ... input buffer ready.
> Starting new track at sector: 0
> Track 01: 8038 of 8038 MB written (fifo 100%) [buf  96%]
> 4.0x.cdrecord: Input/output error. write_g1: scsi sendcmd: no error
> CDB:  2A 00 00 3E CC 90 00 00 09 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 72 0B 00 00 00 00 00 0E 09 0C 00 00 00 02 00 00
> Sense Key: 0x0 No Additional Sense, Segment 11
> Sense Code: 0x00 Qual 0x02 (end-of-partition/medium detected) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 270.368s timeout 200s
>
> write track data: error after 8428748800 bytes

You like to write 8428767232 bytes
the error occurs after 8428748800 bytes. So only
18432 bytes (9 sectors) are missing.

I need to look at the difference between 4115609 sectors and 4173824 
sectors.....


Jörg

-- 
 EMail:joerg at schily.isdn.cs.tu-berlin.de (home) Jörg Schilling D-13353 Berlin
       js at cs.tu-berlin.de                (uni)  
       joerg.schilling at fokus.fraunhofer.de (work) Blog: http://schily.blogspot.com/
 URL:  http://cdrecord.berlios.de/private/ ftp://ftp.berlios.de/pub/schily